请使用下面的模版提问（创建话题后勾选相应的选项）：
Jetson 模组
[√] Jetson AGX Orin
Jetson Orin NX
Jetson Orin Nano
Jetson AGX Xavier
Jetson Xavier NX
Jetson TX 系列
Jetson Nano
Jetson 软件
JetPack 5.1.3
[√] JetPack 5.1.4
JetPack 6.0
JetPack 6.1
JetPack 6.2
DeepStream SDK
NVIDIA Isaac
SDK Manager 管理工具版本
2.3.0
2.2.0
2.1.0
其他
问题描述
spi@c260000 {
iommus = <0x03 0x04>;
#address-cells = <0x01>;
dma-coherent;
clock-names = “spi\0pll_p\0osc”;
nvidia,clk-parents = “pll_p\0osc”;
resets = <0x02 0x5c>;
interrupts = <0x00 0x25 0x04>;
clocks = <0x02 0x88 0x02 0x5e 0x02 0x5b>;
#size-cells = <0x00>;
spi-max-frequency = <0x3dfd240>;
dma-names = “rx\0tx”;
compatible = “nvidia,tegra186-spi”;
status = “okay”;
reg = <0x00 0xc260000 0x00 0x10000>;
phandle = <0x38f>;
dmas = <0x05 0x10 0x05 0x10>;
reset-names = “spi”;
spi@0 {
compatible = "tegra-spidev";
reg = <0x00>;
spi-max-frequency = <0x2faf080>;
controller-data {
nvidia,enable-hw-based-cs;
nvidia,tx-clk-tap-delay = <0x00>;
nvidia,rx-clk-tap-delay = <0x10>;
};
};
prod-settings {
#prod-cells = <0x04>;
prod {
prod = <0x00 0x194 0x80000000 0x00>;
};
};
};
在设备树中将SPI1使能，并添加spi@0，在/dev中也可以看得到是添加成功的
随后我运行了spidev_test，可以看得到新增的spidev1.0是不通的
我需要如何再修改设备树，或进行其它修改或调试